The key to our success is “Good Product Quality, Reasonable Value and Efficient Service” for Good quality Jiuijin 44 Inch Ms Carbon Steel Pipe Standard Length ERW Welded, Presently, we’re seeking ahead to even better cooperation with overseas buyers depending on mutual added benefits. You should sense free to get in touch with us for additional facts.
The key to our success is “Good Product Quality, Reasonable Value and Efficient Service” for China Carbon Steel Pipe Price and Carbon Steel Seamless Pipe, In the future, we promise to keep provide the high quality and more cost-effective goods, the more efficient after sales service to our all customers all over the world for the common development and the higher benefit.
ERW steel pipe in this standard is For mechanical and pressure applications and is also acceptable for ordinary uses in steam, water,gas, and air lines. It is suitable for welding,and suitable for forming operations involving coiling,bending,and flanging.
Manufacture: Electric resistance welded
Size: OD:15~700mm W.T: 1.5~20mm
Grade: Grade A and Grade B.
Length: 6M or specified length as required.
Ends: Plain End, Beveled End, Threaded and coupling
Grade and Chemical Composition (％)
|
Grade |
C |
Mn |
P≤ |
S≤ |
Cu |
Ni |
Cr |
Mo |
V |
|
Type S (Seamless pipe) |
|||||||||
|
Grade A |
0.25 |
0.95 |
0.05 |
0.045 |
0.40 |
0.40 |
0.40 |
0.15 |
0.08 |
|
Grade B |
0.3 |
1.2 |
0.05 |
0.045 |
0.40 |
0.40 |
0.40 |
0.15 |
0.08 |
Tensile Requirements：
|
|
Grade A |
Grade B |
|
Tensile strength, min,psi (MPa) |
48000 (330) |
60000 (415) |
|
Yield strength, min,psi (MPa) |
30000 (205) |
35000 (240) |
Weight –The weight of the pipes shall not vary more than ±10% from its specified weight (mass).
Diameter-For pipes NPS 11/2 OR smaller, the outside diameter at any point shall not vary more than ±1/64 in. From the specified outside diameter. For pipes NPS 2 (DN50) or larger, the outside diameter shall not vary more than ±1% from the specified outside diameter.
Thickness-The minimum wall thickness at any point shall be not more than 12.5% under the specified wall thickness.
Tensile testing of the pipe body—The tensile test should be carried out in accordance with ISO6892 or ASTM A370. Longitudinal samples should be used. Twice per test unit of pipe with the same cold-expansion ratio a.b.d.
Flattening Test—One flattening test shall be made on specimens from each end of two tubes selected from each lot.
Bending Test— a sufficient length of pipe shall stand being bent cold through 90° around a cylindrical mandrel.
Nondestructive electric test-as an alternative to the hydro-static test, the full body of each pipe shall be tested with a nondestructive electric test. Where nondestructive electric test is performed, the lengths shall be marked with the letters”NDE”
Hydro-static Test—Each tube shall be subjected to the hydro-static pressure test.
100% X-ray test for the weld seam.
The ultrasonic testing.
The eddy current examination.
A sufficient number of visual surface imperfections to provide seasonable assurance is necessary. The defect shall be removed or cut off within the limits of requirements on length. The finished pipe shall be reasonably straight.
Manufacturer’s name or mark
Specification number(year-date or required)
Size( OD, W.T, length)
Grade( A or B)
Type of pipe( F, E, or S)
Test pressure( seamless steel pipe only)
Heat Number
Any additional information specified in the purchase order.
Bare pipe, Black / Varnish coating, zinc coated and epoxy coated, etc ( customized);
6″ and below in bundles with two cotton slings;
Both ends with end protectors;
Plain end, bevel end(2″and above with bevel ends, degree: 30~35°), threaded and coupling;
Marking.The key to our success is “Good Product Quality, Reasonable Value and Efficient Service” for Good quality Jiuijin 44 Inch Ms Carbon Steel Pipe Standard Length ERW Welded, Presently, we’re seeking ahead to even better cooperation with overseas buyers depending on mutual added benefits. You should sense free to get in touch with us for additional facts.
Good quality China Carbon Steel Pipe Price and Carbon Steel Seamless Pipe, In the future, we promise to keep provide the high quality and more cost-effective goods, the more efficient after sales service to our all customers all over the world for the common development and the higher benefit.
