AS 1074: tubes ígwè na tubulars maka ọrụ nkịtị
Bọtịnụ igodo nsoroụzọ
Nkọwa ọkọlọtọ AS 1074
| Oke | Na-akọwapụta ihe achọrọ maka tubes steel threaded na tubular, yana ọkpọkọ nchara dị larịị dabara adaba maka screwing dị ka akọwapụtara na AS 1722.1. |
| Nhazi | Mgbidi mgbidi atọ nke tube: Ìhè akpọrọ, Ọkara, na Arọ |
| Tube | Enwere ike welded na enweghị nkebi tubes: ogologo edo okirikiri oghere oghere |
| Eriri ịghasa | Ọkpụkpọ eriri ga-agbaso AS 1722.1 |
| Dayameta dị n'èzí | DN 8 ruo DN 150 gụnyere (ọnụ ọnụ) |
| Ọkpụrụkpụ mgbidi | 1.8mm-5.4mm |
| mkpuchi | Mkpuchi Varnish, galvanized, 3 n'ígwé PE, FBE, wdg. |
| Ụkpụrụ emetụtara | ISO 65; ISO 3183, ASTM A53, ASTM A106; BS EN 10255, BS 1387; DIN 2440, DIN 2448; JIS G 3452; JIS G 3454; CSA Z245.1; GOST 10704-621; ;EN 10217-1; wdg. |
AS 1074 Chemical mejupụtara
| chemical mejupụtara | oke |
| CE(Carbon dakọtara) | ≤0.4 |
| P(Phosphorus) | kacha 0.045% |
| S(Sulfur) | kacha 0.045% |
CE(Carbon dakọtara) =C+Mn/6
Phosphorus (P)naSulfur (S):Ihe abụọ a na-ebelata ike na weldability nke ígwè.Ọkwa phosphorous dị elu na sọlfọ nwere ike ime ka igwe na-agbaji agbaji, ọkachasị na obere okpomọkụ.
Ihe dakọtara Carbon (CE):Nke a bụ ihe nleba anya nke nchara nchara nke na-eburu n'uche ọnụọgụ carbon dị na nchara yana ihe ndị ọzọ na-ekekọta (dịka, manganese, chromium, molybdenum, wdg) nke na-emetụta weldability ya.Dị elu na carbon Ẹkot, ndị obere weldable ígwè bụ na ihe preheating na post-ọgwụgwọ a chọrọ maka ịgbado ọkụ.
AS 1074 chọrọ tensile
AS 1074 akụkụ
| Okpokoro 2.1 akụkụ nke ígwè tubes-ìhè | |||||
| Nha aha | Dayameta dị n'èzí mm | Ọkpụrụkpụ mm | Mass nke nwa tube n'arọ/m | ||
| min | max | Dị larịị ma ọ bụ screwed na-agwụ | Screwed na socket | ||
| DN 8 | 13.2 | 13.6 | 1.8 | 0,515 | 0,519 |
| DN 10 | 16.7 | 17.1 | 1.8 | 0.67 | 0,676 |
| DN 15 | 21.0 | 21.4 | 2.0 | 0,947 | 0,956 |
| DN 20 | 26.4 | 26.9 | 2.3 | 1.38 | 1.39 |
| DN 25 | 33.2 | 33.8 | 2.6 | 1.98 | 2.00 |
| DN 32 | 41.9 | 42.5 | 2.6 | 2.54 | 2.57 |
| DN 40 | 47.8 | 48.4 | 2.9 | 3.23 | 3.27 |
| DN 50 | 59.6 | 60.2 | 2.9 | 4.08 | 4.15 |
| DN 65 | 75.2 | 76.0 | 3.2 | 5.71 | 5.83 |
| DNA 80 | 87.9 | 88.7 | 3.2 | 6.72 | 6.89 |
| DN 100 | 113.0 | 113.9 | 3.6 | 9,75 | 10.0 |
| Okpokoro 2.2 akụkụ nke ígwè tubes-ọkara | |||||
| Nha aha | Dayameta dị n'èzí mm | Ọkpụrụkpụ mm | Mass nke nwa tube n'arọ/m | ||
| min | max | Dị larịị ma ọ bụ screwed na-agwụ | Kwụsara na oghere | ||
| DN 8 | 13.3 | 13.9 | 2.3 | 0,641 | 0,645 |
| DN 10 | 16.8 | 17.4 | 2.3 | 0,839 | 0,845 |
| DN 15 | 21.1 | 21.7 | 2.6 | 1.21 | 1.22 |
| DN 20 | 26.6 | 27.2 | 2.6 | 1.56 | 1.57 |
| DN 25 | 33.4 | 34.2 | 3.2 | 2.41 | 2.43 |
| DN 32 | 42.1 | 42.9 | 3.2 | 3.10 | 3.13 |
| DN 40 | 48 | 48.8 | 3.2 | 3.57 | 3.61 |
| DN 50 | 59.8 | 60.8 | 3.6 | 5.03 | 5.10 |
| DN 65 | 75.4 | 76.6 | 3.6 | 6.43 | 6.55 |
| DNA 80 | 88.1 | 89.5 | 4.0 | 8.37 | 8.54 |
| DN 100 | 113.3 | 114.9 | 4.5 | 12.2 | 12.5 |
| DN 125 | 138.7 | 140.6 | 5.0 | 16.6 | 17.1 |
| DN 150 | 164.1 | 166.1 | 5.0 | 19.7 | 20.3 |
| Okpokoro 2.3 akụkụ nke tube ígwè-dị arọ | |||||
| Nha aha | Dayameta dị n'èzí mm | Ọkpụrụkpụ mm | Mass nke nwa tube n'arọ/m | ||
| min | max | Dị larịị ma ọ bụ screwed na-agwụ | Kwụsara na oghere | ||
| DN 8 | 13.3 | 13.9 | 2.9 | 0,765 | 0,769 |
| DN 10 | 16.8 | 17.4 | 2.9 | 1.02 | 1.03 |
| DN 15 | 21.1 | 21.7 | 3.2 | 1.44 | 1.45 |
| DN 20 | 26.6 | 27.2 | 3.2 | 1.87 | 1.88 |
| DN 25 | 33.4 | 34.2 | 4.0 | 2.94 | 2.96 |
| DN 32 | 42.1 | 42.9 | 4.0 | 3.80 | 3.83 |
| DN 40 | 48.0 | 48.8 | 4.0 | 4.38 | 4.42 |
| DN 50 | 59.8 | 60.8 | 4.5 | 6.19 | 6.26 |
| DN 65 | 75.4 | 76.6 | 4.5 | 7.93 | 8.05 |
| DNA 80 | 88.1 | 89.5 | 5.0 | 10.3 | 10.5 |
| DN 100 | 113.3 | 114.9 | 5.4 | 14.5 | 14.8 |
| DN 125 | 138.7 | 140.6 | 5.4 | 17.9 | 18.4 |
| DN 150 | 164.1 | 166.1 | 5.4 | 21.3 | 21.9 |
| IHE: Akụkụ na oke na-adabere na ISO 65. | |||||
Ọ bụrụ na ị ga-achọ ịmụtakwu banyerechaatị dị arọ na nhazi ogena ọkọlọtọ,biko pịa ebe a!
Oke ndidi
| Nkwenye akụkụ | ||
| Ndepụta | Ụdị | kpochapu |
| Ọkpụrụkpụ (T) | Ọkụ welded ọkụ | nkeji 92% |
| Ọkara na arọ welded tubes | nkeji 90% | |
| Ọkara na arọ tubes enweghị nkebi | nkeji 87.5% | |
| Dayameta dị n'èzí (OD) | Ọkụ welded ọkụ | Tebụl 2.1 |
| Ọkara ọkpọkọ | Tebụl 2.2 | |
| Ọkpụkpọ dị arọ | Tebụl 2.3 | |
| Mass | ngụkọta ogologo≥150 m | ± 4% |
| Otu ọkpọkọ ígwè | 92% ~ 110% | |
| Ogologo | Ogologo ọkọlọtọ | 6.50± 0.08 m |
| Ogologo ogologo Ebe akọwapụtara ogologo ogologo, ma ọ bụ maka eriri eriri ma ọ bụ maka tubes njedebe | 0 ~ +8 mm | |
Galvanized
| Ndepụta | Ihe | |
| Ọkọlọtọ | Tubes nyere iwu galvanized ga-agbaso AS 1650. | |
| Ọdịdị | Elu nke ọkpọkọ galvanized ga-anọgide na-aga n'ihu, dị ka nke ọma na nke ọma na-ekesa dị ka o kwere mee, na enweghị ntụpọ nke ga-emetụta arụmọrụ ma ọ bụ ọrụ nke ọkpọkọ na-eji. | |
| N'ime dayameta | Tubes nke DN 8 ruo DN 25 gụnyere ga-, mgbe galvanizing, ga-enwe ike inwe mkpanaka 230 mm ogologo, nke kwesịrị ekwesị dayameta dị ka e nyere na Note A, gafere ha iji hụ na a free esịtidem dayameta. | |
| Rịba ama | Ọkpụkpụ | Tubọ ndị a ga-eji eri ga-abụ galvanized tupu eri. |
| Sockets | A ga-awụnye oghere ndị a ga-eji eri eri tupu e kee ya. | |
| Tubular | Tubular nke a ga-eji eri ga-abụ galvanized tupu eri. | |
| Mara A: Pipe dayameta: DN 8 Dayameta nke mkpanaka: 4.4mm Pipe dayameta: DN 10 Dayameta nke mkpanaka: 7.1mm Dayameta Pipe: DN 15 Oghere mkpanaka: 9.5mm Dayameta Pipe: DN 20 Dayameta nke mkpanaka: 14.3mm Dayameta ọkpọkọ: DN 25 Dayameta nke mkpanaka: 20.6mm | ||
Ịka akara
A ga-ekewa tubes site na agba n'otu akụkụ dị ka ndị a:
| Tube | Agba |
| Igwe ọkụ tube | Agba aja aja |
| Ọkara tube | Acha anụnụ anụnụ |
| tube dị arọ | Uhie |
A ga-etinye akara tupu tubes ahapụ ọrụ onye nrụpụta.
Nchedo
A ga-echekwa eri nke tubes niile nke ọma pụọ na corrosion.Ọkpụkpọ ọ bụla buru ibu karịa DN 80 ga-enwe mgbanaka nchebe nke etinyere na nsọtụ screwed.
Ụkpụrụ emetụtara AS 1074
TS EN ISO 65 tubes ígwè carbon dabara adaba maka ịsacha dị ka ISO 7-1 si kwuo
TS EN ISO 3183lọ ọrụ mmanụ na gas - ọkpọkọ igwe maka sistemu ụgbọ njem pipeline
ASTM A53: Nkọwa ọkọlọtọ maka ọkpọkọ, ígwè, oji na-ekpo ọkụ, mkpuchi Zinc, Welded na enweghị nkebi
ASTM A106: Nkọwa ọkọlọtọ maka ọkpọkọ igwe anaghị agba nchara maka ọrụ okpomọkụ dị elu
TS EN 10255 tubes steel na-abụghị alloy dabara adaba maka ịgbado ọkụ na eri
BS 1387: tubes igwe eji eme mmiri, gas, ikuku na uzuoku
DIN 2440: tubes ígwè dị arọ nke dabara adaba maka screwing
DIN 2448: Igwe anaghị agba nchara na akụkụ tubes, ọnụ ọgụgụ nkịtị kwa otu ogologo
JIS G 3452: Carbon ígwè ọkpọkọ maka ọkpọkọ nkịtị
JIS G 3454: Carbon ígwè ọkpọkọ maka ọrụ nrụgide
CSA Z245.1: Ọkụ ígwè
GOST 10704-91: Igwe anaghị agba nchara nchara nchara
SANS 62-1: Ọkụ ígwè maka mmiri na mmiri mkpofu
API 5L: Nkọwapụta maka Pipe Line
TS EN 10217-1 tubes ígwè welded maka ebumnuche nrụgide - tubes steel na-abụghị alloy nwere akụrụngwa okpomọkụ akọwapụtara.
Oke ngwa
Ihe owuwu: A na-eji ya eme ihe n'ihe owuwu ụlọ dịka akụkụ dị mkpa nke ọkpọkọ, ọkpọkọ gas, na usoro kpo oku.
Ụlọ ọrụ mmepụta ihe na mmepụta ihe: dị ka usoro ọkpọkọ maka njem nke akụrụngwa, ihe mkpofu na ngwaahịa emechara.
Ụlọ ọrụ mmanụ na gas: dị ka ọkpọkọ maka njem mmanụ na gas, karịsịa na nchịkọta na nkesa usoro.
Agriculture: maka njem mmiri na usoro ogbugba mmiri n'ubi.
Ụlọ ọrụ Ngwuputa: ibuga mineral na ihe ndị ọzọ, yana usoro mmiri mmiri.
Injinia ime obodo: ọkpọkọ n'ime mmiri na-ebubata mmiri na sistemu mmiri nke obodo, yana usoro mgbanyụ ọkụ.
Machinery na ụgbọ ala: maka mbufe mmiri mmiri na gas dị ka akụkụ nke akụrụngwa na ụgbọ ala.
Ngwaahịa anyị
Gbasara anyị
BotopSteel bụ onye China ọkachamara welded Carbon Steel Pipes Onye nrụpụta & ndị na-eweta ihe karịrị afọ 16 nwere 8000+ tọn nke ọkpọkọ ahịrị enweghị nkebi na ngwaahịa kwa ọnwa.Nye gị ngwaahịa ọkpọkọ ígwè dị elu ma dị ọnụ ala, ọ bụrụ na ịchọrọ biko kpọtụrụ anyị, anyị ga-enye gị ihe ngwọta dị iche iche nke ígwè ígwè.
mkpado: dị ka 1074, ígwè tubes, welded tubes, enweghị nkebi tubes,suppliers, emepụta, ụlọ mmepụta ihe, stockists, ụlọ ọrụ, N'ogbe, ịzụrụ, price, nhota, nnukwu, maka ire ere, efu.
Oge nzipu: Mar-29-2024