Onye na-eduzi ọkpọkọ igwe na-emepụta & onye na-ebubata na China |

Ọkpụkpọ Steel welded LSAW: atụmatụ na usoro nrụpụta

LSAW (ịgbado ọkụ okpukpu abụọ nke submerge arc ogologo)carbon ígwè ọkpọkọbụ ụdị nkeSAW ọkpọkọmere nke ígwè efere na-ekpo ọkụ akpọrepu site JCOE ma ọ bụ UOE akpụ technology.Teknụzụ JCOE na-anọchite anya nhazi na nhazi usoro a na-etinye n'oge nrụpụta yana ịgbado ọkụ n'ime na mpụta na mgbasawanye oyi emere mgbe ịgbado ọkụ.

Mgbe atụnyere UOEỌkụ ígwè LSAW, LSAW ọkpọkọ emepụta na China nwere ike na-emepụta ihe nha dị ka otú: OD 406 mm - 1620 mm, ọkpụrụkpụ 6.35 mm - 60 mm, ọkpọkọ ogologo 2 m - 18 m naỌkụ LSAWinwe elu.

Ọkụ welded LSAW
Ọkpụkpọ Carbon LSAW
  • LSAW ígwè ọkpọkọ mmepụta usoro

LSAWnnukwu dayameta ígwè ọkpọkọA kọwara usoro mmepụta ihe na usoro ndị a:

 1. Plate Probe: A na-eji nke a na-emepụta nnukwu dayameta LSAW nkwonkwo ozugbo ọ banyere n'ahịrị mmepụta nke bụ nyocha ultrasonic zuru ezu nke mbụ.

2. Milling: Igwe eji egwe ọka na-arụ ọrụ a site na efere igwe nri ihu abụọ iji mezuo ihe achọrọ nke obosara efere ahụ na akụkụ ya na ọdịdị na ogo.

3. Akụkụ a na-atụgharị mbụ: A na-enweta akụkụ a site na iji igwe na-ehulata n'ihu efere efere.N'ọnụ efere kwesịrị izute curvature chọrọ.

4. Na-akpụ: Mgbe nzọụkwụ mbụ na-ehulata, na ọkara mbụ nke JCO ịkpụzi igwe, mgbe stampụ ígwè, ọ na-enwere n'ime a "J" udi mgbe na ọkara nke ọzọ nke otu efere ígwè ọ na-ehulata na pịa. n'ime ọdịdị "C", mgbe ahụ oghere ikpeazụ na-etolite ụdị "O".

5. Tupu ịgbado ọkụ: Nke a bụ ime ka ígwè ọkpọkọ welded kwụ ọtọ mgbe emechara ya wee jiri gas ịgbado ọkụ (MAG) maka ịgbado ọkụ na-aga n'ihu.

6. N'ime weld: A na-eme nke a na tandem multi-waya submerged arc ịgbado ọkụ (ihe dị ka waya anọ) na n'ime akụkụ nke ogologo onuete welded ígwè ọkpọkọ.

7. N'èzí Weld: N'èzí weld bụ tandem multi-waya submerged arc ịgbado ọkụ na elu akụkụ nke LSAW ígwè ọkpọkọ ịgbado ọkụ.

8. Ultrasonic Testing: N'èzí na n'ime nke ogologo onuete welded ígwè ọkpọkọ na n'akụkụ abụọ nke isi ihe na-welded na 100% nnyocha.

9. Nyochaa X-ray: A na-eme nyocha nyocha nke ụlọ ọrụ X-ray n'ime na n'èzí site na iji usoro nhazi ihe oyiyi iji jide n'aka na e nwere nchọpụta nchọpụta.

10. Mgbasawanye: Nke a bụ maka ịrụzu submerged arc ịgbado ọkụ na ogologo onuete nchara anwụrụ ogologo oghere dayameta ka mma ígwè tube si size nkenke na mma nkesa nke nrụgide na ígwè tube.

11. Nnwale hydraulic: A na-eme nke a na igwe nyocha nke hydraulic maka ígwè mgbe ọ gbasasịrị ule site na mgbọrọgwụ maka ijide n'aka na ọkpọkọ ígwè na-emezu ihe ndị a chọrọ na igwe nwere ndekọ na-akpaghị aka na nchekwa nchekwa.

12. Chamfering: Nke a gụnyere nyocha a na-eme na ọkpọkọ ígwè na njedebe nke usoro ahụ dum.

 

lsaw ígwè ọkpọkọ suppliers
en10210 LSAW Pipe

Oge nzipu: Nov-14-2023

  • Nke gara aga:
  • Osote: