AS 1074: Tuubooyinka birta iyo tuubooyinka loogu talagalay adeegga caadiga ah
Badhamada navigation
AS 1074 dulmarka caadiga ah
| Baaxadda | Wuxuu qeexayaa shuruudaha tuubooyinka birta dunta leh iyo tuubooyinka, iyo tuubooyinka birta ee dhamaadka-dhamaadka ah ee ku habboon isku-laabashada sida ku qeexan AS 1722.1 |
| Kala soocida | Saddex dhumucdiisuna waxay tahay tuubada: Iftiin loo qoondeeyay, Dhexdhexaad, iyo Culus |
| Tube | Waa la alxan karaa iyo tuubooyinka aan xidhnayn: dhererka qaybta godan ee lebbiska ah |
| Xargaha isku dubaridka | Tuubooyinka dunta leh waa inay u hoggaansamaan AS 1722.1 |
| Dhexroor ka baxsan | DN 8 ilaa DN 150 loo dhan yahay (xajmiga magaca) |
| Dhumucda darbiga | 1.8mm-5.4mm |
| daahan | Daahan Varnish, galvanized, 3 lakab PE, FBE, iwm. |
| Heerarka La Xiriira | ISO 65, ISO 3183, ASTM A53, ASTM A106, TS EN 10255, BS 1387; DIN 2440, DIN 2448; JIS G 3452; JIS G 3454; CSA Z245.1; GOST 10704-65-10704-91; EN 10217-1; iwm. |
AS 1074 Halabuurka Kiimikada
| ka kooban kiimiko | baaxadda |
| CE(Kaarboon u dhiganta) | ≤0.4 |
| P(Phosphorus) | ugu badnaan 0.045% |
| S(Sulfur) | ugu badnaan 0.045% |
CE(Kaarboon u dhiganta) =C+Mn/6
Fosfooraska (P)iyoSulfur (S):Labadan walxood waxay yareeyaan adkaanta iyo alxanka birta.Heerarka fosfooraska iyo baaruuddu waxay sababi karaan in birta ay jajabto, gaar ahaan marka heerkulku hooseeyo.
Kaarboon u dhiganta (CE):Tani waa cabbirka alxanka birta taas oo tixgalinaysa cadadka kaarboon ee ku jira birta iyo sidoo kale walxaha kale ee daawaha (tusaale, manganese, chromium, molybdenum, iwm) kuwaas oo saameeya alxanka.Mar kasta oo u dhigma kaarboonka, waa yaraanta alxanka birta, waxaana badiyaa tillaabooyinka kulaylka iyo daawaynta ka dambeeya ayaa looga baahan yahay alxanka.
AS 1074 Shuruudaha Xakamaynta
AS 1074 Cabbirka
| SHAXDA 2.1 QAYBKA TUBEESAHA BIRTA-Iftiinka | |||||
| Cabbirka magaca | Dhexroor ka baxsan mm | Dhumucda mm | Tiro badan oo tuubo madow ah kg/m | ||
| min | max | Banaan ama maroojin dhamaado | Isku duubni iyo goglan | ||
| DNA 8 | 13.2 | 13.6 | 1.8 | 0.515 | 0.519 |
| DN 10 | 16.7 | 17.1 | 1.8 | 0.67 | 0.676 |
| DN 15 | 21.0 | 21.4 | 2.0 | 0.947 | 0.956 |
| DN 20 | 26.4 | 26.9 | 2.3 | 1.38 | 1.39 |
| DN 25 | 33.2 | 33.8 | 2.6 | 1.98 | 2.00 |
| DN 32 | 41.9 | 42.5 | 2.6 | 2.54 | 2.57 |
| DN 40 | 47.8 | 48.4 | 2.9 | 3.23 | 3.27 |
| DN 50 | 59.6 | 60.2 | 2.9 | 4.08 | 4.15 |
| DNA 65 | 75.2 | 76.0 | 3.2 | 5.71 | 5.83 |
| DNA 80 | 87.9 | 88.7 | 3.2 | 6.72 | 6.89 |
| DN 100 | 113.0 | 113.9 | 3.6 | 9.75 | 10.0 |
| SHAXDA 2.2 CABIRKA TUBOOYINKA BIRTA-DHEXDHEXAAD | |||||
| Cabbirka magaca | Dhexroor ka baxsan mm | Dhumucda mm | Tiro badan oo tuubo madow ah kg/m | ||
| min | max | Banaan ama maroojin dhamaado | Maroojis iyo godad | ||
| DNA 8 | 13.3 | 13.9 | 2.3 | 0.641 | 0.645 |
| DN 10 | 16.8 | 17.4 | 2.3 | 0.839 | 0.845 |
| DN 15 | 21.1 | 21.7 | 2.6 | 1.21 | 1.22 |
| DN 20 | 26.6 | 27.2 | 2.6 | 1.56 | 1.57 |
| DN 25 | 33.4 | 34.2 | 3.2 | 2.41 | 2.43 |
| DN 32 | 42.1 | 42.9 | 3.2 | 3.10 | 3.13 |
| DN 40 | 48 | 48.8 | 3.2 | 3.57 | 3.61 |
| DN 50 | 59.8 | 60.8 | 3.6 | 5.03 | 5.10 |
| DNA 65 | 75.4 | 76.6 | 3.6 | 6.43 | 6.55 |
| DNA 80 | 88.1 | 89.5 | 4.0 | 8.37 | 8.54 |
| DN 100 | 113.3 | 114.9 | 4.5 | 12.2 | 12.5 |
| DN 125 | 138.7 | 140.6 | 5.0 | 16.6 | 17.1 |
| DN 150 | 164.1 | 166.1 | 5.0 | 19.7 | 20.3 |
| SHAXDA 2.3 QAYBKA TUBEESAHA BIRTA-CULUS | |||||
| Cabbirka magaca | Dhexroor ka baxsan mm | Dhumucda mm | Tiro badan oo tuubo madow ah kg/m | ||
| min | max | Banaan ama maroojin dhamaado | Maroojis iyo godad | ||
| DNA 8 | 13.3 | 13.9 | 2.9 | 0.765 | 0.769 |
| DN 10 | 16.8 | 17.4 | 2.9 | 1.02 | 1.03 |
| DN 15 | 21.1 | 21.7 | 3.2 | 1.44 | 1.45 |
| DN 20 | 26.6 | 27.2 | 3.2 | 1.87 | 1.88 |
| DN 25 | 33.4 | 34.2 | 4.0 | 2.94 | 2.96 |
| DN 32 | 42.1 | 42.9 | 4.0 | 3.80 | 3.83 |
| DN 40 | 48.0 | 48.8 | 4.0 | 4.38 | 4.42 |
| DN 50 | 59.8 | 60.8 | 4.5 | 6.19 | 6.26 |
| DNA 65 | 75.4 | 76.6 | 4.5 | 7.93 | 8.05 |
| DNA 80 | 88.1 | 89.5 | 5.0 | 10.3 | 10.5 |
| DN 100 | 113.3 | 114.9 | 5.4 | 14.5 | 14.8 |
| DN 125 | 138.7 | 140.6 | 5.4 | 17.9 | 18.4 |
| DN 150 | 164.1 | 166.1 | 5.4 | 21.3 | 21.9 |
| FIIRO GAAR AH: Cabbirrada iyo cufnaanta waxay waafaqsan yihiin ISO 65. | |||||
Haddii aad jeclaan lahayd inaad wax badan ka ogaatojaantusyada miisaanka tuubada iyo jadwalkaheerka caadiga ah,fadlan halkan ku dhufo!
Dulqaadyada cabbirka
| Dulqaadyada cabbirka | ||
| Liiska | Nooca | qaado |
| Dhumucda (T) | Tuubooyinka alxanka fudud | min 92% |
| Tuubooyinka alxanka dhexdhexaadka ah iyo kuwa culus | min 90% | |
| Tuubooyinka dhexdhexaadka ah iyo kuwa culus oo aan cillad lahayn | min 87.5% | |
| Dhexroor ka baxsan (OD) | Tuubooyinka alxanka fudud | Shaxda 2.1 |
| Tuubooyinka dhexdhexaadka ah | Shaxda 2.2 | |
| Tuubooyinka culus | Shaxda 2.3 | |
| Mass | dhererka guud≥150 m | ± 4% |
| Hal tuubo oo bir ah | 92% ~ 110% | |
| Dhererka | Dhererka caadiga ah | 6.50±0.08 m |
| Dhererka saxda ah Halka dhererka saxda ah lagu cayimay, ha ahaato tubooyinka dunta leh ama tubooyinka dhamaadka cad | 0 ~ +8 mm | |
galvanized
| Liiska | Curiyaha | |
| Heerka | Tuubooyinka la dalbaday galvanized waa inay u hoggaansamaan AS 1650. | |
| Muuqashada | Dusha sare ee tuubada galvanized waa inay ahaato mid joogto ah, sida siman oo siman loo qaybiyay intii suurtogal ah, oo ka nadiifsan cilladaha saameeya waxqabadka ama shaqada tuubada isticmaalka. | |
| Dhexroorka gudaha | Tuubooyinka DN 8 ilaa DN 25 loo wada dhan yahay waa, ka dib galvanizing, inay awood u yeeshaan inay yeeshaan ul dhererkeedu yahay 230 mm, dhexroorka ku habboon sida lagu sheegay Note A, iyada oo loo sii marayo si loo hubiyo dhexroor gudaha ah oo bilaash ah. | |
| Ogow | Tuubooyinka | Tuubooyinka la rabo in la duniyo waa in la galvanized ka hor inta aan dunta la gelin. |
| Sockets | Saldhigyada dunta la jeexayo waa in la galvanized ka hor inta aan dunta la gelin. | |
| Tubular | Tubularrada la rabo in la duniyo waa in la galvanized ka hor inta aan dunta la gelin. | |
| Xusuusin A: Dhexroorka tuubada: DN 8 Dhexroor usha: 4.4mm Dhexroorka tuubada: DN 10 Dhexroor usha: 7.1mm Dhexroorka tuubada: DN 15 Dhexroor usha: 9.5mm Dhexroorka tuubada: DN 20 Dhexroor usha: 14.3mm Dhexroorka tuubada: DN 25 Dhexroor usha: 20.6mm | ||
Calaamadayn
Tuubooyinka waa in lagu kala soocaa midabka hal daraf sida soo socota:
| Tube | Midabka |
| Tuubo khafiif ah | bunni |
| Tuubo dhexdhexaad ah | Buluug |
| Tuubo culus | Casaan |
Calaamadaha waa in la mariyaa ka hor inta aysan tuubooyinka ka tagin shaqada saaraha.
Ilaalinta
Duubka dhammaan tuubooyinka waa in si wax ku ool ah looga ilaaliyo daxalka.Tuubo kasta oo ka weyn DN 80 waa inay lahaataa giraan ilaalin ah oo ku dheggan cidhifka maroojka ah.
AS 1074 Heerarka La Xiriira
TS EN ISO 65: Tuubooyinka birta kaarboon ee ku habboon in la xoqo iyadoo la raacayo TS ISO 7-1
TS EN ISO 3183 Warshadaha batroolka iyo gaaska dabiiciga ah - Dhuumaha birta ee nidaamyada gaadiidka dhuumaha
ASTM A53Tilmaamaha caadiga ah ee Beebka, Birta, Madaw iyo Kulul-Masaydhka, Zinc-Dahaarka leh, Alxanka iyo Xumaan La'aanta
ASTM A106Qeexidda caadiga ah ee Dhuumaha Birta Kaarboon-ka ee aan Xumaan lahayn ee Adeegga Heerkulka Sare
TS EN 10255 Tuubooyinka birta aan aluminiumka ahayn ee ku habboon alxanka iyo dunta
BS 1387: Tuubooyinka birta ee loo isticmaalo biyaha, gaaska, hawada, iyo uumiga
DIN 2440: Tuubooyinka birta miisaanka dhexdhexaadka ah ee ku habboon xoqidda
DIN 2448: Tuubooyinka birta ah iyo cabbirrada tuubooyinka, cufnaanta caadiga ah ee dhererka cutubka
JIS G 3452: Tuubooyinka birta kaarboon ee tuubooyinka caadiga ah
JIS G 3454: Tuubooyinka birta kaarboon ee adeega cadaadiska
CSA Z245.1: Dhuumaha birta
GOST 10704-91: Tuubooyinka Khadka-dhamaadka ee Biraha Korontada ah ee Alxan
SANS 62-1: Dhuumaha birta ee biyaha iyo biyaha wasakhda ah
API 5LTilmaamaha Dhuumaha Khadka
TS EN 10217-1 Tuubooyinka birta alxanka leh ee ujeedooyinka cadaadiska - Tuubooyinka birta aan daawaynta lahayn oo leh sifooyin heerkul gaar ah
Baaxadda Codsiga
Dhisme: Waxaa loo isticmaalaa qaab-dhismeedka sida qayb muhiim ah oo ka mid ah tuubooyinka, tuubooyinka gaaska, iyo hababka kuleylka.
Wershadaha iyo wax soo saarka: sida nidaamka dhuumaha ee gaadiidka alaabta ceeriin, qashinka, iyo alaabta dhammaatay.
Warshadaha saliidda iyo gaaska: sida tubooyinka gaadiidka saliidda iyo gaasta, gaar ahaan nidaamka ururinta iyo qaybinta.
Beeraha: gaadiidka biyaha ee hababka waraabka.
Warshadaha macdanta: gudbinta macdanta iyo agabka kale, iyo sidoo kale hababka bullaacadaha.
Injineerinka degmada: tuubbooyinka biyaha magaalooyinka iyo nidaamka bullaacadaha, iyo sidoo kale nidaamyada dab-damiska.
Mashiinada iyo baabuurta: loogu talagalay qaadista dareeraha iyo gaaska oo qayb ka ah qaybaha farsamada iyo baabuurta.
Alaabtayada
Nagu saabsan
BotopSteel waa Soosaaraha Tubooyinka Kaarboon-kaarboonka ee Xirfadleyda Alxanka leh & Alaab-qeybiyeyaal ka badan 16 Sano oo wata 8000+ Tan oo ah tuubooyin Khad La'aan ah oo kayd ah bil kasta.Ku siiya alaab tayo sare leh oo qiimo jaban leh, haddii aad u baahan tahay fadlan nala soo xiriir, waxaanu ku siin doonaa noocyo badan oo ah xalalka tuubooyinka birta.
Tags: sida 1074, Tuubooyinka birta ah, tuubooyinka alxanka, tuubooyinka aan xuduud lahayn,alaab-qeybiyeyaal, warshadeeyayaal, warshado, saamiley, shirkado, jumlo, gad, qiimo, xigasho, bulk, iib, kharash.
Waqtiga boostada: Mar-29-2024