UMvelisi weMibhobho yentsimbi eKhokelayo kunye noMboneleli eTshayina |

I-JIS G 3454 i-Carbon Steel Pipes for Pressure Service

I-JIS G 3454 iityhubhu zentsimbizityhubhu zentsimbi zekhabhoni zilungele ukusetyenziswa kwindawo ezingezizo zoxinzelelo oluphezulu kunye needayamitha zangaphandle ukusuka kwi-10.5 mm ukuya kwi-660.4 mm kunye nobushushu bokusebenza ukuya kuthi ga kwi-350 ℃.

I-JIS G 3454 ityhubhu yentsimbi

Ukuhlelwa kweBanga

I-JIS G 3454 inamabakala amabini ngokobuncinane besivuno sombhobho wensimbi ogqityiweyo.

STPG370, STPG410

Iinkqubo Zokuvelisa

Yenziwe kusetyenziswa ukudibanisa okufanelekileyo kweenkqubo zokuvelisa i-tube kunye neendlela zokugqiba.

Uphawu lwebakala Uphawu lwenkqubo yokuvelisa
Inkqubo yokwenziwa kwemibhobho Indlela yokugqiba Ukuhlelwa kwe-zinc-coating
STPG370
STPG410
Ingenamthungo:S
Ukuxhathisa kombane okudityanisiweyo:E
Kugqityiwe:H
Kubanda-kugqityiwe:C
Njengoko ukuxhathisa umbane welding:G
Imibhobho emnyama: imibhobho ayinikwanga i-zinc-coating
Imibhobho emhlophe: imibhobho enikwe i-zinc-coating

Umbhobho wentsimbi osebenza ebandayo uya kutsalwa emva kokwenziwa.Ukuba kuyimfuneko, uMthengi unokuchaza unyango olushushu lwe-welds ye-STPG 410 yokuxhathisa ipayipi yensimbi edibeneyo.

Ukuba i-welding ye-resistance isetyenzisiweyo, i-welds kwindawo yangaphakathi nangaphandle yombhobho kufuneka isuswe ukuze ifumane i-weld egudileyo ecaleni kwe-contour yombhobho.Nangona kunjalo, ukuba kunzima ukususa i-weld kwindawo yangaphakathi, imeko edibeneyo ingagcinwa.

Idiphu eshushu iGalavanizing -iMbhobho emhlophe

Kubamhlopheumbhobho(imibhobho enikwe i-zinc-coating), indawo yokuhlolaumbhobho omnyama(imibhobho enganikwanga i-zinc-coating) iyakucocwa ngokuqhunyiswa kwesanti, ukucolwa, okanye ngolunye unyango phambi kokugalela idiphu eshushu.I-Zinc ye-galvanizing yediphu eshushu iya kuba yi-JIS H 2107 iBanga loku-1 ingot ye-zinc edibeneyo okanye i-zinc yomgangatho olinganayo okanye ongcono.

Ezinye iimfuno ngokubanzi zokugalela intsimbi zihambelana neJIS H 8641.

Ukwakhiwa kweekhemikhali ze-JIS G 3454

Izinto ngokubanzi zeemvavanyo zohlalutyo kunye neendlela zesampulu kunye nohlalutyo ziya kuhambelana ne-JIS G 0404 into yesi-8 (Ukwakheka kweeKhemikhali).

Indlela yohlalutyo iya kuhambelana ne-JIS G 0320.

Uphawu lwebakala C (iKhabhoni) Si (Silicon) Mn (Manganese) P (Phosphorus) S (Sulfur)
max max max max
STPG370 0.25% 0.35% 0.30-0.90% 0.04% 0.04%
STPG410 0.30% 0.35% 0.30-1.00% 0.04% 0.04%

IiPropati zoomatshini be-JIS G 3454

Iimfuno ngokubanzi zovavanyo lomatshini zihambelana ne-JIS G 0404 Igatya lesi-7 (IiMfuno Jikelele) kunye neGatya lesi-9 (iiPropati zoomatshini).

Nangona kunjalo, indlela yokuqokelela i-specimen yovavanyo lomatshini iya kuhambelana ne-JIS G 0404 Igatya 7.6 (Iimeko zokuqokelelwa kwemifanekiso kunye neesampuli), Uhlobo A.

Abavavanyi bombhobho baya kwenza iimvavanyo ngokuhambelana ne-JIS Z 2241 kunye namandla okuqina, amandla emveliso, kunye nobude obuya kuhambelana neThebhile 3.

I-JIS G 3454 yoVavanyo lweTheyibhile yesi-3

Nangona kunjalo, kwiityhubhu ezingaphantsi kwe-8 mm ubukhulu, ubude buya kuhambelana neThebhile 4 kwiimvavanyo ze-tensile usebenzisa i-12 okanye i-5 yesampuli.

I-JIS G 3454 yoVavanyo lweTheyibhile yesi-4

Uvavanyo lokucaba

Ubushushu bovavanyo kufuneka bube liqondo lobushushu begumbi (5 ~ 35 ℃), umzekelo ubekwe phakathi kwamacwecwe amabini acaba kwaye ucinezelwe de umgama H phakathi kwamacwecwe ungaphantsi kwexabiso elikhankanyiweyo, xa umfuziselo ucandiwe, jonga ukuba kukho ukuqhekeka. kumphezulu webloko yesampula yombhobho wentsimbi.

Xa H=2/3D, khangela i-weld yokuqhekeka.

Xa H=1/3D, khangela iintanda kwiindawo ngaphandle kwe-weld seam.

Umbhobho wensimbi ongenamthungo unokukhululwa kuvavanyo lwe-flattening, kodwa ukusebenza kombhobho kufuneka kuhambelane nemimiselo.

Ukugoba uvavanyo

Isebenza kwimibhobho ene-diameter yangaphandle ≤ 40A (48.6mm).

Lo mzekelo awuyi kuqhekeka xa ugobile kwi-90 ° kunye ne-radius yangaphakathi yamaxesha ama-6 ngaphandle kwedayamitha yangaphandle.

Umthengi unokucacisa i-angle yokugoba ye-180 kunye / okanye i-radius yangaphakathi yamaxesha ama-4 ububanzi obungaphandle bombhobho.

Ukumelana nemibhobho edibeneyo, i-weld seam iya kufumaneka malunga ne-90 ° ukusuka kwindawo engaphandle ye-bend.

Uvavanyo lwe-Hydraulic okanye uvavanyo olungonakalisi

Yonke imibhobho kufuneka ivavanywe nge-hydraulically okanye ivavanywe ngokungonakalisi.

Nangona kunjalo, kwimibhobho emhlophe, oku ngokuqhelekileyo kwenziwa ngaphambi kokuba i-galvanizing.

Uvavanyo lwe-Hydrotesting okanye olungonakalisi luyindlela ebalulekileyo yokulawula umgangatho wemibhobho ukuqinisekisa ukhuseleko kunye nokuthembeka kwemibhobho ngexesha lofakelo kunye nokusetyenziswa.

Uvavanyo lweHydrostatic

Faka isicelo soxinzelelo oluphezulu kunoluchaziweyo lwe-hydraulic test kumbhobho kwaye ubambe ubuncinane imizuzwana emi-5 ukuze ubone ukuba umbhobho unokumelana noxinzelelo kwaye ukuba ukuvuza kwenzeka.

Itheyibhile 5 Ubuncinci boxinzelelo lovavanyo lwehydraulic
Ubukhulu bodonga lwegama Inombolo yeShedyuli: Sch
10 20 30 40 60 80
Ubuncinci boxinzelelo lovavanyo lwe-hydraulic, iMpa 2.0 3.5 5.0 6.0 9.0 12

Uvavanyo olungonakalisi

Uvavanyo lwe-ultrasonic (UT) indlela iya kuhambelana ne-JIS G 0582. Nangona kunjalo, uvavanyo olungqongqo ngakumbi kunoluhlu lwe-UD lweziphene ezenziweyo lunokusetyenziswa kwakhona endaweni.

Indlela ye-Eddy yovavanyo lwangoku (ET) iya kuhambelana ne-JIS G 0583. Nangona kunjalo, inokuthi ithathelwe indawo ngovavanyo olungqongqo kunolwahlulo lwe-EY Artificial Defects.

Ngokuqinisekileyo, ezinye iindlela zokuvavanya ezingonakalisiyo ezihlangabezana nemilinganiselo zinokukhethwa endaweni.

Ukunyamezelwa kweDimensional

Ukunyamezela okungathandekiyo kubunzima bemibhobho yensimbi yokuchasana-welding isebenza kuphela kwi-resistance-welded welds yentsimbi yombhobho;ukunyamezelana okulungileyo akusebenzi.

JIS G 3454 Dimensional Tolerance

Itafile yobunzima bombhobho kunye neshedyuli yemibhobho ye-JIS G3454

Steel Pipe Weight Calculation Formula

W=0.02466t(Dt)

W: ubunzima beyunithi yombhobho (kg/m)

t: Ubukhulu bodonga lombhobho (mm)

D: ngaphandle kwedayamitha yombhobho (mm)

0.02466: into yokuguqula ukufumana iW

Le fomyula ingentla luguqulelo olusekwe kuxinaniso lweetyhubhu zentsimbi ze-7.85 g/cm³ kwaye iziphumo zisondezwe kumanani amathathu abalulekileyo.

Itheyibhile yobunzima bombhobho wentsimbi

Iitshati zobunzima bombhobho zidlala indima ebaluleke kakhulu kwinkqubo yoyilo lwemibhobho, ubunjineli, ukuthenga, kunye nolwakhiwo, kwaye zisisalathiso esiyimfuneko nesibalulekileyo kubunjineli bemibhobho.

Iishedyuli zombhobho

Ishedyuli yombhobho yitafile esetyenziselwa ukulinganisa imilinganiselo yombhobho, ngokuqhelekileyo ukucacisa ubuninzi bodonga kunye nobukhulu obuqhelekileyo bombhobho.

IShedyuli 10, 20, 30, 40, 60 kunye ne-80 kwi-JIS G 3454.

Funda ngakumbi malungaubunzima bombhobho kunye neshedyuli yemibhobhongaphakathi komgangatho.

Imbonakalo

Umbhobho uya kuba ngokuthe ngqo kwaye iziphelo zawo ziya kuba zixhomekeke kwi-axis yombhobho.

Umgangatho wangaphakathi kunye wangaphandle wombhobho uya kugqitywa kakuhle kwaye ukhululekile kwiziphene ezingathandekiyo ukusebenzisa.

Ukunyangwa komphezulu kunokwenziwa ngokusila, ukucwangciswa, kunye nezinye iindlela zokujongana neziphene zomhlaba, kodwa ubuninzi emva konyango abukho ngaphantsi kobunzima obuncinci, kwaye ubume bombhobho buhlala buhambelana.

UKutyabeka komphezulu we-JIS G 3454

Umgangatho wangaphakathi nangaphandle wemibhobho yensimbi inokugqithwa ngeengubo ezichasene ne-anticorrosive, ezifana neengubo ezityebileyo ze-zinc, i-epoxy coatings, i-primer coatings, i-3PE, kunye ne-FBE.

Ukumakisha

Iityhubhu zentsimbi ezidlula uhlolo ziya kuphawulwa ngolu lwazi lulandelayo kwi-tube-by-tube basis.Nangona kunjalo, ukuba i-diameter encinci yangaphandle yeetyhubhu yenza kube nzima ukuphawula ityhubhu nganye ngabanye, iityhubhu zinokuthi zihlanganiswe kwaye inqwaba nganye imakwe ngendlela efanelekileyo.

Ulandelelwano lokumakisha aluchazwanga.Ukongeza, izinto ezithile zinokushiywa ngesivumelwano phakathi kwamaqela ekuhanjisweni, ngaphandle kokuba imveliso inokuchongwa.

a) Uphawu lwebakala

b) Uphawu lwenkqubo yokuvelisa

Isimboli yenkqubo yokwenziwa kwemveliso iya kuba ngolu hlobo lulandelayo.Udwi unokutshintshwa ngezithuba ezingenanto.

Umbhobho wentsimbi ongenamthungo ogqitywe kushushu:-SH

Umbhobho wentsimbi ongenamthungo ogqitywe kubanda:-SC

Njengoxhathiso lombane umbhobho wentsimbi odityanisiweyo:-UMZ

Umbhobho wentsimbi odityanisiweyo ogqityiweyo oshushu:-EH

Umbhobho wentsimbi odityanisiweyo ogqityiweyo obandayo:-EC

c) Imilinganiselo, ebonakaliswa ngedayamitha yesiqhelo × ubukhulu bodonga oluqhelekileyo, okanye ngaphandle kwedayamitha × ubukhulu bodonga.

d) Igama lomenzi okanye uphawu lokuchonga

Umzekelo: BOTOP JIS G 3454-SH STPG 370 50A×SHC40 HEAT NO.00001

Usetyenziso lwe-JIS G 3454 iPipe yeNsimbi

I-JIS G 3454 imibhobho yentsimbi esemgangathweni inoluhlu olubanzi lwezicelo kwiindawo ezahlukeneyo zoshishino kunye nokwakhiwa, ngokukodwa ezisetyenziselwa ukuhambisa imidiya eyahlukeneyo yamanzi.

Iinkqubo zokubonelela ngamanzi:I-JIS G 3454 imibhobho yentsimbi esemgangathweni ingasetyenziselwa kwiinkqubo zokubonelela ngamanzi kamasipala, iinkqubo zokubonelela ngamanzi kwimizi-mveliso, njl.njl. ukuthutha amanzi acocekileyo ompompo okanye amanzi acociweyo.

Iinkqubo zeHVAC:Le mibhobho yentsimbi ikwasetyenziswa ngokuqhelekileyo kwiinkqubo zeHVAC ukuhambisa amanzi okupholisa okanye amanzi ashushu.

Iinqanawa zoxinzelelo:I-JIS G 3454 iipayipi zensimbi nazo zisetyenziswa kwezinye iinqanawa zoxinzelelo kunye neebhoyili

Izityalo zemichiza:Ezi zingasetyenziselwa ukuhambisa iindidi ezahlukeneyo zemidiya yekhemikhali.

Ishishini leoli negesi:nangona i-JIS G 3454 ilungele kakhulu uthutho loxinzelelo oluphantsi, isenokusetyenziswa kwezinye izicelo ezingaphantsi kwe-oyile kunye negesi yegesi.

Singumvelisi wemibhobho yentsimbi yekhabhoni ekumgangatho ophezulu odityanisiweyo kunye nomthengisi ovela eChina, kunye nesitokhwe semibhobho yentsimbi engenamthungo, ekunika uluhlu olubanzi lwezisombululo zemibhobho yentsimbi!

Iithegi: JIS G 3454, STPG, SCH, umbhobho wekhabhoni, umbhobho omhlophe, ityhubhu emnyama, ababoneleli, abavelisi, iifektri, abagcini bempahla, iinkampani, ihoseyili, thenga, ixabiso, ucaphulo, ubuninzi, ukuthengiswa, ixabiso.


Ixesha lokuposa: May-01-2024

  • Ngaphambili:
  • Okulandelayo: