UMvelisi weMibhobho yentsimbi eKhokelayo kunye noMboneleli eTshayina |

Yintoni i-JIS G 3452?

I-JIS G 3452 iPipe yentsimbingumgangatho waseJapan wombhobho wentsimbi wekhabhoni osetyenziswa ngoxinzelelo oluphantsi lokusebenzela ukuthutha umphunga, amanzi, ioyile, igesi, umoya, njl.

Ifanelekile imibhobho enobubanzi obungaphandle be-10.5 mm-508.0 mm.

jis g 3452 umbhobho wentsimbi

Imibhobho iya kuveliswa ngokudibanisa okufanelekileyo kweenkqubo zokwenziwa kombhobho kunye neendlela zokugqiba ezikhethiweyo.

Uphawu lwebakala Uphawu lwenkqubo yokuvelisa Ukuhlelwa kwe-zinc-coating
Inkqubo yokwenziwa kwemibhobho Indlela yokugqiba Ukumakisha
SGP Ukuxhathisa kombane okudityanisiweyo:E
Impundu idityanisiwe:B
Kugqityiwe:H
Kubanda-kugqityiwe:C
Njengoko ukuxhathisa umbane welding:G
Njengoko kunikezelwe13 b). Imibhobho emnyama: imibhobho ayinikwanga i-zinc-coating
Imibhobho emhlophe: imibhobho enikwe i-zinc-coating

Imibhobho iya kuhanjiswa ngokwesiqhelo njengoko yenziwe.Umbhobho osebenza ngokubanda uya kutsalwa emva kokuba ubugcisa bugqityiwe.

Ukuba inkqubo yokwenziwa kwe-welding ye-resistance isetyenzisiweyo, i-welds iya kususwa kwiindawo zangaphakathi nangaphandle zombhobho ukufumana i-weld egudileyo kunye ne-contour yombhobho.Amaso e-weld kumphezulu ongaphakathi akanakususwa ukuba oku kungenxa yothintelo lwesixhobo okanye umbhobho wedayamitha.

I-ERW Production Process Flow Diagram

Uhlobo lokuphela kombhobho lwe-JIS G 3452

Umbhobho Ukuphela Ukukhetha

Uhlobo lwesiphelo sombhobho we-DN≤300A/12B: i-threaded or flat end.

Uhlobo lwesiphelo sombhobho we-DN≤350A/14B: isiphelo esicaba.

Ukuba umthengi ufuna i-beveled end, i-angle ye-bevel yi-30-35 °, ububanzi be-bevel bombhobho wentsimbi yentsimbi: max 2.4mm.

JIS G 3452 Beveled umbhobho uphela

Qaphela: Kwi-JIS G 3452, kukho uthotho lwe-A kunye no-B lwedayamitha ye-DN.Apho u-A elingana ne-DN, iyunithi ithi mm;B ilingana ne-NPS, iyunithi ingaphakathi.

Iimfuno zoMbhobho onemisonto eziPheleleyo

Imibhobho enemisonto iya kwenziwa ngokunika iziphelo zombhobho iintambo ze taper njengoko kuchaziwe kwi-JIS B 0203, kunye nokufaka enye yeziphelo eziphothiweyo ngohlobo olujijeweyo (emva koku ekubhekiselwa kulo njengesokethi) ehambelana ne-JIS B 2301 okanye i-JIS B 2302.

Ukuphela kombhobho ngaphandle kwesokethi kuya kukhuselwa ngendandatho yokukhusela intambo okanye ezinye iindlela ezifanelekileyo.

Imibhobho enemisonto inokubonelelwa ngaphandle kweesokethi ukuba icaciswe njalo ngumthengi.Ukuhlolwa kwemisonto ye taper kuya kuhambelana ne-JIS B 0253.

Ukwakhiwa kweekhemikhali ze-JIS G 3452

Iimfuno eziqhelekileyo zohlalutyo lweekhemikhali kunye neendlela zesampula zohlalutyo lwe-thermal ziya kuhambelana ne-JIS G 0404 igatya 8. Indlela yohlalutyo lwe-thermal iya kuhambelana nemigangatho ye-JIS G 0320.

Uphawu lwebakala P (Phosphorus) S (Sulfur)
SGP ubuninzi 0.040% ubuninzi 0.040%

Amanqanaba aphezulu e-phosphorus kunye ne-sulfure anciphisa ukusebenza kunye neepropati ze-mechanical zensimbi kwaye zithandwa kakhulu kwi-brittleness ngexesha le-welding.Ngoko ke, umgangatho kunye ne-weldability ye-carbon steel pipes inokuqinisekiswa ngokunciphisa i-phosphorus kunye nomxholo wesulfure.

Ezinye izinto zokudibanisa nazo zingongezwa njengoko zifunwa.

IiPropati zoomatshini ze-JIS G 3452

Iimfuno jikelele zovavanyo lomatshini ziya kuhambelana nesolotya lesi-7 kunye nelesi-9 le-JIS G 0404. Nangona kunjalo, kwiindlela zesampulu ezinikwe kwi-7.6 ye-JIS G 0404, kuphela indlela yesampulu A esebenzayo.

Uvavanyo lwe-tensile: Indlela yovavanyo iya kuhambelana nemigangatho ye-JIS Z 2241.

Uphawu lwebakala Tensile strength Ukwandisaa
umz, %
Isiqwenga sovavanyo Uvavanyo
ulwalathiso
Ubukhulu bodonga, mm
N/mm² (MPA) >3 ≤4 >4 ≤5 >5 ≤6 >6 ≤7 >7
SGP 290 imiz No.11 Ngokunxuseneyo kwi-axis yombhobho 30 30 30 30 30
No.12 Ngokunxuseneyo kwi-axis yombhobho 24 26 27 28 30
No.5 I-Perpendicular ukuya kwi-axis yombhobho 19 20 22 24 25
aKwimibhobho yedayamitha engu-32A okanye ngaphantsi, amaxabiso obude kule theyibhile awasebenzi, nangona iziphumo zawo zovavanyo lobude ziya kubhalwa.Kule meko, imfuneko yobude obuvunyiweyo phakathi komthengi kunye nomvelisi ingasetyenziswa.

Ipropati yoKutyabeka

Kwiqondo lobushushu begumbi (5℃~35℃), i-weld i-perpendicular ukuya kwicala loxinzelelo.Gxininisa umboniso phakathi kwamaqonga amabini de umgama H phakathi kwamaqonga ufikelela kwisibini kwisithathu sobubanzi obungaphandle beziko lombhobho wentsimbi, uze ukhangele iintanda.

Ukubanda

Xa i-DN≤50A, yenza uvavanyo lokugoba.

Xa ugoba kwi-radius yangaphakathi ye-90 ° yamaxesha angama-6 ububanzi bangaphandle bombhobho, isiqwenga sovavanyo asiyi kuvelisa nayiphi na imicu.Ngaphambi kokugoba, linganisa i-engile yokugoba ukusuka kwindawo ethe tye.

Uvavanyo lweHydraulic okanye uvavanyo olungonakalisi (NDT)

Umbhobho ngamnye kufuneka ube luVavanyo lweHydraulic okanye uvavanyo olungenakonakala.

Uvavanyo lweHydraulic

Umbhobho kufuneka umelane ne-2.5MPa ubuncinane ubuncinane be-5 s, ngaphandle kokuvuza.

Uvavanyo olungonakalisi

Iimpawu zovavanyo ezingonakalisi zingasetyenziselwa uhlolo lwe-ultrasonic okanye lwe-eddy lwangoku, kwaye umbhobho uya kuhlangabezana nezi mpawu zilandelayo zovavanyo ezingonakalisi.

Ukuhlolwa kwe-ultrasonic, iisampuli zereferensi ezichazwe kwi-JIS G 0582 eziqulethe imigangatho yereferensi yeklasi ye-EU iya kusetyenziswa njengenqanaba le-alamu;naluphi na uphawu olusuka kumbhobho olulingana okanye olukhulu kunomgangatho we-alam luya kusetyenziswa njengenqanaba le-alam.umqondiso uya kusetyenziswa njengenqanaba le-alam;Naluphi na uphawu olusuka kumbhobho olulingana okanye olukhulu kunomgangatho we-alam luya kuba sisizathu sokwaliwa.

Kuhlolo lwangoku lwe-eddy, imiqondiso esuka kwiisampulu zereferensi equlethe imigangatho yereferensi yodidi lwe-EZ njengoko kuchaziwe kwi-JIS G 0583 iya kusetyenziswa njengemigangatho ye-alam;Naluphi na umqondiso olingana okanye omkhulu kunomgangatho we-alam ukusuka kumbhobho uya kuba sisizathu sokwaliwa.iya kusebenza njengenqanaba le-alam;Naluphi na umqondiso osuka kumbhobho olingana okanye omkhulu kunomgangatho we-alam uya kuba sisizathu sokwaliwa.Ngokwengqiqo yomenzi, inqanaba le-alam elibukhali elingaphantsi komqondiso womgangatho wesalathiso ochaziweyo linokusetyenziswa.

Ezinye iindlela zovavanyo ezingonakalisi nazo zingasetyenziswa, umz. ukufunyaniswa kokuvuza okuzenzekelayo njengoko kuchaziwe kwi-JIS G 0586.

Itshathi yobunzima bombhobho kunye nokunyamezelwa koMda

Steel Pipe Weight Calculation Formula

Ukucinga ukuba i-1 cm3 yentsimbi ibe yi-7.85g ubunzima

W=0.02466t(Dt)

W: ubunzima beyunithi yombhobho (kg / m);

t: ubukhulu bodonga lombhobho (mm);

D: ngaphandle kobubanzi bombhobho (mm);

0.02466: into yokuguqula ukufumana i-W;

Isondezwe kumanani amathathu abalulekileyo ngokuhambelana neJIS Z 8401, umthetho A.

Itshathi yobunzima bombhobho kunye nokunyamezelwa koMda

jis g 3452 Itshathi yobunzima bombhobho kunye nokunyamezelwa koMda

aIdayamitha yegama iya kuba ngokwelinye lamagama A okanye B kwaye ibonakaliswe ngokuncamathisela unobumba A okanye B, nokuba yeyiphi na indlela esetyenziswayo, emva kwenani ledayamitha.

bKwiindawo ezilungisiweyo zendawo, ukunyamezela kule tafile akusebenzi.

cKwimibhobho enedayamitha engama-350A okanye ngaphezulu, umlinganiselo wedayamitha yangaphandle unokutshintshwa ngobude obujikelezileyo, apho unyamezelo olusetyenziswayo luya kuba yi-0.5 %.Ubude obulinganiselweyo obulinganisiweyo (I) buya kuguqulelwa kwidayamitha yangaphandle (D) kusetyenziswa le fomula ilandelayo.

D=l/Π

D: ububanzi bangaphandle (mm);

l: ubude obujikelezayo (mm);

Π: 3.1416.

Imbonakalo yombhobho wentsimbi

Imbonakalo

Indawo yangaphakathi nangaphandle yombhobho iya kuba lula kwaye ikhululekile kwiziphene ezingathandekiyo ukuyisebenzisa.

Umbhobho uya kuba ngokuthe tye, kunye neziphelo kwii-angles ezichanekileyo kwi-axis yombhobho.

Ukulungisa isiphene

Umbhobho omnyama (umbhobho wentsimbi ngaphandle konyango lokuchasana nomhlwa) unokulungiswa ngokusila, umatshini, okanye ezinye iindlela, kwaye indawo elungisiweyo iya kuba mpuluswa ecaleni kwekhonto yombhobho.

Nangona kunjalo, ubukhulu bodonga obulungisiweyo bugcinwa ngaphakathi kokunyamezela okuchaziweyo.

Ukwaleka komphezulu

Nayiphi na okanye yomibini imiphezulu yombhobho ingagqunywa umz., i-zinc-rich coating, epoxy coating, primer coating, 3PE, FBE, njl.

jis g 3452 Surface Coating

Iigalati ze-JIS G 3452

Idiphu eshushu iGalvanizing

Imibhobho yensimbi, ukuba ifakwe igalvanized, imibhobho enemisonto kunye neziseko kufuneka ifakwe nge-zinc ngaphambi kokuqinisa imicu.

Ukucocwa komphezulu wentsimbi ngokucokisekileyo ngokuqhunyiswa kwesanti, ukuchola, njalo njalo, kulandele ukugalelwa kwediphu eshushu.

Kwi-zinc-coating, i-distilled zinc ingot Udidi loku-1 oluchazwe kwi-JIS H 2107 okanye i-zinc enomgangatho olinganayo ubuncinane kule nto iya kusetyenziswa.

Ezinye iimfuno eziqhelekileyo zokugquma i-zinc zichazwe kwi-JIS H 8641.

Uvavanyo lweGalavanization

Indlela yoVavanyo Ngokwendlela yokuvavanya echazwe kwiNqaku lesi-6 le-JISH0401, i-specimen ifakwe kwisisombululo se-sulfate yethusi, i-1 min 5 amaxesha, kwaye i-specimen ihlolwe ukuze ibone ukuba ifikelela ekupheleni.

Ukumakishwa kwe-JIS G 3452

Umxholo welogo uqulethe ubuncinci obu buncinci obulandelayo, umyalelo onokuthi ulungelelaniswe ngokukhululekile.

a) Uphawu lwebakala (SGP)

b) Uphawu lwenkqubo yokuvelisa

Isimboli yenkqubo yokwenziwa kwemveliso iya kuba ngolu hlobo lulandelayo.Udwi (izi) unokutshintshwa ngezithuba.

Njengoko ukuxhathisa ombane welding umbhobho wentsimbi: -EG

Umbhobho wentsimbi odityanisiweyo oshushu ogqityiweyo: -EH

Umbhobho wentsimbi odityanisiweyo ogqityiweyo obandayo: -EC

Umbhobho wentsimbi onempundu: -B

c) Imilinganiselo, ebonakaliswa ngedayamitha yegama

d) Igama lomenzi okanye uphawu lokuchonga

Umzekelo: BOTOP JIS G 3452-EG SGP 500A*7.9*12000MM PIPE NO.001

Usetyenziso oluphambili lwe-JIS G 3452

Imibhobho yentsimbi ye-JIS G 3452 isetyenziswa ikakhulu ukuthutha amanzi, irhasi, ioli, umphunga, kunye nezinye iinjongo jikelele.Le mibhobho idla ngokusetyenziswa kulwakhiwo, oomatshini, iimoto, iinqanawa, nakwamanye amasimi.

Ishishini leoli negesi: isetyenziswe kwiinkqubo zemibhobho yokuthutha i-oyile, igesi yendalo ye-liquefied petroleum gas, njl.

Ishishini lokwakha: isetyenziselwa iinkqubo ze-hydraulic, iipayipi zokuhambisa amanzi, iinkqubo zokufudumeza, iinkqubo zomoya, njl. kwizakhiwo zokwakha.

Ukwenziwa koomatshini: Isetyenziswe kwiinkqubo ze-hydraulic, iinkqubo ze-pneumatic, iipayipi ezihambisa izixhobo zemishini, njl.

Ukwenziwa kweemoto: isetyenziswe kwinkqubo yokukhupha, i-fuel system, inkqubo ye-hydraulic, njl. yemoto.

Ukwakhiwa kweenqanawa: isetyenziswe kwiinkqubo zemibhobho, isakhiwo se-cabin yeenqanawa, njl.

Ishishini lemichiza: isetyenziswe kwizityalo zeekhemikhali zokuthutha imibhobho, i-reactors, njl.

Ubunjineli bakamasipala: isetyenziswe kwiinkqubo zemibhobho yokubonelela ngamanzi asezidolophini, i-drainage, ukucocwa kogutyulo, njl.

Imigangatho Efanelekileyo

I-ASTM A53/A53M, DIN 2440, EN 10255, GB/T 3091, BS 1387, ISO 65, NFA 49-146,AS/NZS 1163, API 5L, ASTM A106/A106M, EN 10216-1, GB 8163.

Iimveliso zethu ezinxulumeneyo

Singomnye wemibhobho yentsimbi yekhabhoni ehamba phambili kunye nabavelisi bemibhobho yentsimbi engenamthungo kunye nabanikezeli abavela eChina, kunye noluhlu olubanzi lwemibhobho yentsimbi ephezulu kwisitokhwe, sizimisele ukukunika uluhlu olupheleleyo lwezisombululo zemibhobho yentsimbi.Ukufumana iinkcukacha ezithe kratya zemveliso, nceda ukhululeke ukudibana nathi, sijonge phambili ekuncedeni ukuba ufumane iinketho ezingcono kakhulu zemibhobho yentsimbi kwiimfuno zakho!

Tags: jis g 3452, sgp, erw, ababoneleli, abavelisi, iifektri, abagcini bempahla, iinkampani, ihoseyili, thenga, ixabiso, ucaphulo, isambuku, intengiso, ixabiso.


Ixesha lokuposa: Apr-28-2024

  • Ngaphambili:
  • Okulandelayo: