Ibanga Nokwakheka Kwamakhemikhali (%)
Ibanga | C≤ | Si | Mn | P≤ | S≤ | Cr | Mo |
I-SCM 420TK | 0.18~ 0.23 | 0.15~ 0.35 | 0.60~ 0.85 | 0.030 | 0.030 | 0.90~ 1.20 | - |
Idatha ye-SCM415TK | 0.13~ 0.18 | 0.15~ 0.35 | 0.60~ 0.85 | 0.030 | 0.030 | 0.90~ 1.20 | 0.15~ 0.30 |
Idatha ye-SCM418TK | 0.16~ 0.21 | 0.15~ 0.35 | 0.60~ 0.85 | 0.030 | 0.030 | 0.90~ 1.20 | 0.15~ 0.30 |
I-SCM 420TK | 0.18~ 0.23 | 0.15~ 0.35 | 0.60~ 0.85 | 0.030 | 0.030 | 0.90~ 1.20 | 0.15~ 0.30 |
I-SCM 430TK | 0.28~ 0.33 | 0.15~ 0.35 | 0.60~ 0.85 | 0.030 | 0.030 | 0.90~ 1.20 | 0.15~ 0.30 |
I-SCM 435TK | 0.33~ 0.38 | 0.15~ 0.35 | 0.60~ 0.85 | 0.030 | 0.030 | 0.90~ 1.20 | 0.15~ 0.30 |
I-SCM 440TK | 0.38~ 0.43 | 0.15~ 0.35 | 0.60~ 0.85 | 0.030 | 0.030 | 0.90~ 1.20 | 0.15~ 0.30 |
Qaphela: 1. I-Ni njengokungcola kwamapayipi ensimbi ahlukahlukene akudluli ku-0.25%, futhi i-Cu ayidluli u-0.30%;2. Uma umthengi ecela ukuhlaziywa komkhiqizo oqediwe, ukuchezuka okuvumelekile kunjengoba kucacisiwe kuThebula 3 le-JIS G0321. |
Ukukhiqiza:ipayipi elingenamthungo (okushisayo kuqediwe futhi kubanda kuqediwe)
Usayizi: OD: 15.0 ~ 114mm WT: 2 ~ 20mm
Ibanga: SCM 415TK,SCM 420 TK.
Ubude: 6M noma ubude obucacisiwe njengoba kudingeka.
Iphela: I-Plain End, I-Beveled End.
Ibanga
Ikhodi yendlela yokukhiqiza (ipayipi elishisayo eliphelile lensimbi engenamthungo: SH;Ipayipi lensimbi elipholile eliqediwe elingenamthungo: SC)
Ubukhulu(ubukhulu obujwayelekile X ukujiya kodonga lokuzisholo noma ukujiya kodonga olungaphandle kwe-X)
Igama lomkhiqizi noma uhlobo oluhlonzayo
-
- Ukubekezelela i-OD ne-WT
Ukwehlukana
Ukubekezelela ku-OD
Ukubekezelelana ku-WT
Ikilasi 1
D<50m
±0.5 mm
S<4mm
+0.6mm
-0.5 mm
50mm≤D
±1%
S≥4mm
+1% -12.5%
Ikilasi lesi-2
D<50m
±0.25mm
S<3mm
±0.3mm
50mm≤D
±0.5%
S≥3mm
±10%
Ikilasi lesi-3
D - 25m
±0.12 mm
S<2mm
±0.15mm
40mm>D≥25mm
±0.15 mm
50mm>D≥40mm
±0.18 mm
S≥2mm
±8%
60mm>D≥50mm
±0.20 mm
Amanothi: ukubekezelela ukujiya kodonga ngalunye kuzofinyezwa endaweni eyodwa yedesimali ngokuhambisana nomthetho we-JIS Z 8401.
70mm>D≥60mm
±0.23mm
80mm>D≥70mm
±0.25 mm
90mm>D≥80mm
±0.30mm
100mm>D≥90mm
±0.40 mm
D≥100mm
±0.50%
1. Ukubekezelelwa kwe-OD kwepayipi lensimbi engenamthungo ngokuqeda oshisayo ngokusho kweClass12. Amapayipi ensimbi acishiwe futhi aqinile ngokwezigaba ezi-4.
- Ukubekezelela i-OD ne-WT